Products
JGD(KST) type flexible double ball rubber joint——SH
Note: 1. Special requirements can be customized according to user drawings. Threaded unions are manufactured according to (ASME, BS, JIS, etc.) thread standards. Rubber spheres can be made of natural rubber, ethylene propylene diene monomer (EPDM) rubber, chloroprene rubber, butyl rubber, nitrile rubber, and fluororubber.
Category:
Rubber Joint Series
Tel:
E-mail:
Description
Main Connection Dimensions
| Serial Number No. | Part | Material |
| 1 | Body | Natural Rubber (NR), Chloroprene Rubber (CR), Butyl Rubber (IIR), Nitrile Rubber (NBR), Fluororubber (FKM), Ethylene Propylene Diene Monomer Rubber (EPDM) |
| 2 | Inner & Outer Rubber | Natural Rubber (NR), Chloroprene Rubber (CR), Butyl Rubber (IIR), Nitrile Rubber (NBR), Fluororubber (FKM), Ethylene Propylene Diene Monomer Rubber (EPDM), Polytetrafluoroethylene (PTFE) |
| 3 | Body Carcass | Nylon cord fabric |
| 4 | Reinforcing Ring | Multi-strand coppering steel wire |
| 5 | threaded union rubber joint | Cast and forged carbon steel (Q235), Stainless steel (201, 304, 316, 321), Plastic (CPVC, PVDF, PPH, UPVC, RPP) |
| Item | Model | KFT-1 | KFT-2 | A. If the medium is oil, acid, or alkali B. If there are special requirements for the working temperature C. OEM orders with drawings or samples are also welcome D. Please specify when ordering A. If media is oil, acid or alkali. B. If special requirements for working temperature C. If OEM orders with drawings or samples D. Please Inform us about above when ordering | |
| Working pressure | 1.0(10) | 1.6(16) | ||
| Burst Pressure | 2.0(20) | 3.0(30) | ||
| Vacuum | 53.3(400) | 86.7(650) | ||
| Applicable Temperature | -20℃~+115℃（-30℃~+250℃ under special conditions) | |||
| Applicable Medium | Air, compressed air, water, sea water, oil, acid, alkali, etc. | |||
| Note: The materials of main parts are the same with those of KXT type | ||||
| Nominal Diameter Nominal Diameter (mm) | Length Length (mm) | Axial displacement Axial displacement (mm) | Horizontal displacement Horizontal displacement (mm) | Angular deflection Angular deflection (a1+a2)° | |||
| mm | inch | Type A | Type B | Extension | Compression | ||
| 15 | 0.5 | 180 | 200 | 5 | 10 | 20 | 45 |
| 20 | 0.75 | 200 | 200 | 5 | 10 | 20 | 45 |
| 25 | 1 | 210 | 200 | 5 | 10 | 20 | 45 |
| 32 | 1.25 | 210 | 200 | 5 | 10 | 20 | 45 |
| 40 | 1.5 | 220 | 200 | 5 | 10 | 20 | 45 |
| 50 | 2 | 220 | 220 | 5 | 10 | 20 | 45 |
| 65 | 2.5 | 240 | 240 | 5 | 10 | 20 | 45 |
| 80 | 3 | 285 | 285 | 5 | 10 | 20 | 45 |
| Note: 1. For OEM orders with special requirements, products can be manufactured according to customer drawings. Threaded union standards can be , ASME, BS, JIS, etc. Rubber ball materials can be natural rubber, EPDM, neoprene, butyl rubber, nitrile rubber, fluororubber, etc. Notes: 1. For OEM orders with special requirement, threaded unions should be made according to customers' drawings. Thread standard can be , ASME, BS, JIS, etc. Material of rubber body can be NR natural rubber, EPDM, Neoprene, IIR butyl rubber, NBR Buna-N, FKM, etc. | |||||||
Keyword:
JGD(KST) type flexible double ball rubber joint——SH
Previous Page:
Inquiry
* Note: Please ensure that you fill in the information accurately and keep the communication open. We will contact you as soon as possible.
Related Products
Message
Copyright © Henan Shuohong Valve Pipe Equipment Co., Ltd.
Powered by :www.300.cn Supported IPV6 Privacy Agreement